How to Lubricate the Running Gear of Gantry Crane
 

 
1. To open reducer vent cap at first use of gantry crane is necessary, because it can promise good aeration and relief inner pressure.

2. Before work, oil level height of reducer should be checked. If it is lower than normal one, identical type lubrication oil ought to be refueled in time.

3. There is no need to add oil on bearings of vehicle wheels of running gear everyday because they have been filled in enough grease (such as
calcium soap grease) when assembled together. However, you still need to replenish grease by oil slot or bearing cap every other two month. Otherwise, fold, clean and change lubricating grease yearly is important.

4. Each engagement points of exposed gears should be smeared oil weekly.